Terms & Conditions of Sale

For Shutters Design installation service:

Nothing in these Terms and Conditions will reduce your statutory rights relating to faulty or miss-described goods.

For further information about your statutory rights contact your local authority Trading Standards Department or Citizens Advice Bureau.

 

1. To the customer

(a) Disregarding item 4. Shutters Design agrees to supply as part of its contract, all materials in accordance with its own or manufacturer’s guidelines and recommendations.

(b) Shutters Design agrees to undertake all necessary precautions during its installations and to carry out fitting in a professional way. All installations are fitted to the best endeavor.

(c) Shutters Design will inform the customer to the best of their knowledge of how the products may be applied. However, no claims for compensation will be accepted against assumptions made concerning our operations, installations and product capabilities. The customer should advise when the windows are opening inside. We are not responsible for shutters installation that will obstruct the window opening.

2. Quotations

(a) All quotations by Shutters Design represent an invitation to the buyer to place an order and do not constitute a legal offer.

The purchase order will be regarded as the offer and L.S order acceptance will be regarded as binding. No alternative terms and conditions will be considered or accepted by Shutters Design.

(b) All prices are quoted without commitment and are subject to alteration or withdrawal by Shutters Sale after 30 days without prior notice. Orders are accepted on the condition that the prices charged are those ruling at the date of despatch unless Shutters Design specifically agrees in writing to engage a fixed price contract.

3. Your Guarantee

(a) Shutters Design agrees to repair or replace any products falling below the high standards set by Shutters Design or by our manufacturers if proven to be defective in materials or workmanship and/or fall outside the permitted tolerance Tolerances allowed: measuring +/- 3 mm and 1mm warp over 300mm. Please note that this does not include: 1. Using the shutter in an exterior environment. 2. A tier on tier installation using LDF range. 3. Products in a high moisture environment. Guarantee periods vary with the type of product.

(b) In the case of Supply Only. Shutters Design agrees to repair or replace any products falling below the high standards set by Shutters Design or by our manufacturers if proven to be defective in materials or workmanship and/or fall outside the permitted tolerance Tolerances allowed: measuring +/- 3 mm and 1mm warp over 300mm. Please note that this does not include: 1. Using the shutter in an exterior environment. 2. A tier on tier installation using Seattle range. 3. Products in a high moisture environment. Guarantee periods vary with the type of product.

(c) Where defective products/workmanship are claimed the buyer must give reasonable access (weekdays 8am – 5pm) to Shutters Design within 2 months from the claim, to evaluate, repair or replace the defective part or product. Failure to give this access to Shutters Design within 3 months will invalidate the claim and any balances outstanding will immediately fall due for payment.

4. Non-Guaranteed Items

Any products supplied at a customer’s request that are outside the relevant manufacturer’s specifications or used in extremely damp conditions outside the manufacturer’s recommendations, where such details are made known during sales consultation and noted on our written quotation, will be excluded from the guarantee.

Shutters Design cannot guarantee the goods against fading especially as a result of exposure to sunlight, where over time, fading will occur.

5. Liabilities

(a) Tolerance levels of overall panel specifications are +/- 3 mm and the product will not be considered defective if falling within the size range. Warping on any part, vertical or horizontal, shall not exceed 1mm per 300mm and shall not be considered defective if within this tolerance.

(b) Shutters Design gives no warranty as to the fitness of the product supplied for any purpose other than that of an internal window dressing as surveyed by the company, other installations and uses are at the risk of the buyer.

(c) If the installation is not completed within the estimated delivery period quoted to the buyer, the buyer may serve notice to Shutters Design requiring that the installation be completed within such reasonable period as the buyer may specify (in general Shutters Design would accept six weeks as being reasonable). If the installation is not completed within such an extended period the buyer may request compensation for each week thereafter that the installation is not completed. Notwithstanding the foregoing;

i. Shutters Design shall not be liable for any delay in the completion of an order arising from any cause beyond the control of Shutters Design.

If Shutters Design specifies a date of completion, the period of any delay beyond the control of Shutters Design shall be deducted from the period of any time penalty.

ii. Cancellation of any uncompleted contract shall not release the buyer from the obligation to pay for that part of the contract that has been completed.

6. Limitations

It is recommended that panels be ordered within our normal specification range. For example, panels above 1800mm in height are ordered with a Mid-rail, and that shutter panel widths do not exceed 550mm. We may exceed the limitation at your request, but in doing so we cannot accept responsibility for problems that result. If the client is not on site when the property is surveyed or installed the shutters will be fitted in accordance with our standard practices unless agreed before confirmation. If they chose to install against our recommendation then liability will be theirs. When the buyer installs the product him/herself or employs his/her labor to install the product Shutters Design will not accept liability for any damage.

7. Stain & Paint Finishes

(a) Stain Finishes: As a natural timber product with varying colors and grains a 100% match against sample swatches cannot be guaranteed.

(b) Paint Finishes: Due to the materials used and the spraying, processes involved some slight tonal differences may be noticeable under certain light conditions, even where a specific color code is supplied and used about a paint finish. These minor variations will not be deemed incorrect or defective on the part of Shutters Design.

8. Samples / Minimum Order

Samples: Free of charge timber/color samples can be supplied to the buyer. Samples for window shutters can be supplied and invoiced at charges specified in the Shutters Design price list if not returned within 1 month of dispatch.

Minimum Order: Our minimum order value is £500.00 including fitting. This is because the costs involved to survey, and later fit prevents us from taking on smaller projects.

9. Retention of Title

Goods shall remain the property of Shutters Design until full payment has been received. The buyer’s right to possession of the goods will cease at the earliest of the following; either (i.) On the expiration of any agreed period of credit, or (ii.) the due date for payment of any invoice has passed.

10. Payment Terms

(a) All materials supplied by Shutters Sale are custom-made to exact requirements in size, finish and design. 

A 50% deposit of the total order value is payable to commence production. By forwarding a payment it is understood that the buyer is instructing Shutters Design to process an order. Acceptance of payment by Shutters Design shall constitute a contract between the buyer and Shutters Design. Cancellation by the buyer without penalty will not be possible once production has begun. Any balances payable are due immediately upon completion of installation.

(b) In the case of Supply-Only/Mail Order any balance will be payable before dispatch.

(c) For your convenience payments made by cheques & BACS there is NO charge. Credit cards incur a 1.5% surcharge.

11. Non-Payment Terms

(a) Unless Shutters Design has approved a credit application evidenced in writing, all goods must be paid for before delivery or on completion of installation.

(b) Shutters Design will inform customers by phone and if necessary in writing of any outstanding amounts if full settlement is not received within 7 days of installation. Amounts unpaid after 14 days will be subject to a “one-off” late payment fee of up to £30.00 and interest shall be charged thereon at a rate of 3% above the base rate of Barclays Bank PLC for the time being on a day to day basis. Interest will be added to the balance monthly. Additional costs incurred to recover the outstanding balance will be added to any balance.

12. Delivery

(a) Delivery times given will be deemed correct at the time of order placement. However, as a custom made product, all delivery times stated shall be for guidance only and shall not be deemed as part of any contract with Shutters Design unless otherwise specified. Specific dates for completion must be notified in writing and included with an order.

Such arrangements may be subject to additional charges as deemed appropriate by Shutters Design.

(b) If goods are delivered to the buyer, before installation by Shutters Design, the buyer shall be responsible for their safekeeping and should make sure they are adequately insured against loss or damage.

13. Mail-Order Delivery/Carriage Charges

UK Mainland Your order will be dispatched in the “best way” in terms of cost and appropriate service unless otherwise agreed.

There is a charge on all orders for goods. Current charges can be found in the Shutters Design most recent price list. Exceptions are single packages of hardware and sample colors, which will be forwarded to the buyer by Shutters Design at the request of the buyer by first class post to be charged at cost if agreed.

(b) Shutters Design will be responsible only for deliveries made by our approved carrier. Prices are subject to VAT

(c) Non-delivery, damage, or pilferage in transit must be reported in writing to Shutters Design within a reasonable time of receipt of invoice or advice of despatch or delivery. Where goods are collected from Shutters Design, by the buyer or a third party nominated by the buyer the risk in the goods passes to the buyer upon delivery to the buyer or such a third party. Thereupon, all liability from Shutters Design in the goods for loss or destruction, breakages, shortages or non-delivery shall cease.

(d) When goods are delivered, the buyer shall be responsible for checking the complete order has been delivered. Any claim for shortage must be made within a reasonable time. Once delivered to the buyer, the buyer shall be responsible for their safekeeping and should make sure they are adequately insured against loss or damage.

Nothing in these Terms and Conditions will reduce your statutory rights relating to faulty or miss-described goods.

For further information about your statutory rights contact your local authority Trading Standards Department or Citizens Advice Bureau.

1. To the customer

(a) Disregarding item 4. Shutters Design agrees to supply as part of its contract, all materials in accordance with its own or manufacturer’s guidelines and recommendations.

(b) Shutters Design agrees to undertake all necessary precautions during its installations and to carry out fitting in a professional way. All installations are fitted to the best endeavor.

(c) Shutters Design will inform the customer to the best of their knowledge of how the products may be applied. However, no claims for compensation will be accepted against assumptions made concerning our operations, installations and product capabilities. The customer should advise when the windows are opening inside. We are not responsible for plantation shutters that will obstruct the window opening.

2. Quotations

(a) All quotations by Shutters Design represent an invitation to the buyer to place an order and do not constitute a legal offer.

The purchase order will be regarded as the offer and L.S order acceptance will be regarded as binding. No alternative terms and conditions will be considered or accepted by Shutters Design.

(b) All prices are quoted without commitment and are subject to alteration or withdrawal by Shutters Design after 30 days without prior notice. Orders are accepted on the condition that the prices charged are those ruling at the date of despatch unless Shutters Design specifically agrees in writing to engage a fixed price contract.

3. Your Guarantee

(a) Shutters Design agrees to repair or replace any products falling below the high standards set by Shutters Design or by our manufacturers if proven to be defective in materials or workmanship and/or fall outside the permitted tolerance Tolerances allowed: measuring +/- 3 mm and 1mm warp over 300mm. Please note that this does not include: 1. Using the shutter in an exterior environment. 2. A tier on tier installation using LDF range. 3. Products in a high moisture environment. Guarantee periods vary with the type of product.

(b) In the case of Supply Only. Shutters Design agrees to repair or replace any products falling below the high standards set by Shutters Design or by our manufacturers if proven to be defective in materials or workmanship and/or fall outside the permitted tolerance Tolerances allowed: measuring +/- 3 mm and 1mm warp over 300mm. Please note that this does not include: 1. Using the shutter in an exterior environment. 2. A tier on tier installation using Seattle range. 3. Products in a high moisture environment. Guarantee periods vary with the type of product.

(c) Where defective products/workmanship are claimed the buyer must give reasonable access (weekdays 8am – 5pm) to Shutters Design within 2 months from the claim, to evaluate, repair or replace the defective part or product. Failure to give this access to Shutters Design within 3 months will invalidate the claim and any balances outstanding will immediately fall due for payment.

4. Non-Guaranteed Items

Any products supplied at a customer’s request that are outside the relevant manufacturer’s specifications or used in extremely damp conditions outside the manufacturer’s recommendations, where such details are made known during sales consultation and noted on our written quotation, will be excluded from the guarantee.

Shutters Design cannot guarantee the goods against fading especially as a result of exposure to sunlight, where over time, fading will occur.

5. Liabilities

(a) Tolerance levels of overall panel specifications are +/- 3 mm, and the product will not be considered defective if falling within the size range. Warping on any part, vertical or horizontal, shall not exceed 1mm per 300mm and shall not be considered defective if within this tolerance.

(b) Shutters Design gives no warranty as to the fitness of the product supplied for any purpose other than that of an internal window dressing as surveyed by the company, other installations and uses are at the risk of the buyer.

(c) If the installation is not completed within the estimated delivery period quoted to the buyer, the buyer may serve notice to Shutters Design requiring that the installation be completed within such reasonable period as the buyer may specify (in general Shutters Design would accept six weeks as being reasonable). If the installation is not completed within such an extended period the buyer may request compensation for each week thereafter that the installation is not completed. Notwithstanding the foregoing;

i. Shutters Design shall not be liable for any delay in the completion of an order arising from any cause beyond the control of Shutters Design.

If Shutters Design specifies a date of completion, the period of any delay beyond the control of Shutters Design shall be deducted from the period of any time penalty.

ii. Cancellation of any uncompleted contract shall not release the buyer from the obligation to pay for that part of the contract that has been completed.

6. Limitations

It is recommended that panels be ordered within our normal specification range. For example, panels above 1800mm in height are ordered with a Mid-rail, and that panel widths do not exceed 550mm. We may exceed the limitation at your request, but in doing so we cannot accept responsibility for problems that result. If the client is not on site when the property is surveyed or installed the shutters will be fitted in accordance with our standard practices unless agreed before confirmation. If they chose to install against our recommendation then liability will be theirs. When the buyer installs the product him/herself or employs his/her labor to install the product Shutters Design will not accept liability for any damage.

7. Stain & Paint Finishes

(a) Stain Finishes: As a natural timber product with varying colors and grains a 100% match against sample swatches cannot be guaranteed.

(b) Paint Finishes: Due to the materials used and the spraying, processes involved some slight tonal differences may be noticeable under certain light conditions, even where a specific color code is supplied and used about a paint finish. These minor variations will not be deemed incorrect or defective on the part of Shutters Design.

8. Samples / Minimum Order

Samples: Free of charge timber/color samples can be supplied to the buyer. Sample shutters can be supplied and invoiced at charges specified in the Shutters Design price list if not returned within 1 month of dispatch.

Minimum Order: Our minimum order value is £500.00 including fitting. This is because the costs involved to survey, and later fit prevents us from taking on smaller projects.

9. Retention of Title

Goods shall remain the property of Shutters Design until full payment has been received. The buyer’s right to possession of the goods will cease at the earliest of the following; either (i.) On the expiration of any agreed period of credit, or (ii.) the due date for payment of any invoice has passed.

10. Payment Terms

(a) All materials supplied by Shutters Sale are custom-made to exact requirements in size, finish and design. 

A 50% deposit of the total order value is payable to commence production. By forwarding a payment it is understood that the buyer is instructing Shutters Design to process an order. Acceptance of payment by Shutters Design shall constitute a contract between the buyer and Shutters Design. Cancellation by the buyer without penalty will not be possible once production has begun. Any balances payable are due immediately upon completion of installation.

(b) In the case of Supply-Only/Mail Order any balance will be payable before dispatch.

(c) For your convenience payments made by cheques & BACS there is NO charge. Credit cards incur a 1.5% surcharge.

11. Non-Payment Terms

(a) Unless Shutters Design has approved a credit application evidenced in writing, all goods must be paid for before delivery or on completion of installation.

(b) Shutters Design will inform customers by phone and if necessary in writing of any outstanding amounts if full settlement is not received within 7 days of installation. Amounts unpaid after 14 days will be subject to a “one-off” late payment fee of up to £30.00 and interest shall be charged thereon at a rate of 3% above the base rate of Barclays Bank PLC for the time being on a day to day basis. Interest will be added to the balance monthly. Additional costs incurred to recover the outstanding balance will be added to any balance.

12. Delivery

(a) Delivery times given will be deemed correct at the time of order placement. However, as a custom made product, all delivery times stated shall be for guidance only and shall not be deemed as part of any contract with Shutters Design unless otherwise specified. Specific dates for completion must be notified in writing and included with an order.

Such arrangements may be subject to additional charges as deemed appropriate by Shutters Design.

(b) If goods are delivered to the buyer, before installation by Shutters Design, the buyer shall be responsible for their safekeeping and should make sure they are adequately insured against loss or damage.

13. Mail-Order Delivery/Carriage Charges

UK Mainland Your order will be dispatched in the “best way” in terms of cost and appropriate service unless otherwise agreed.

There is a charge on all orders for goods. Current charges can be found in the Shutters Design most recent price list. Exceptions are single packages of hardware and sample colors, which will be forwarded to the buyer by Shutters Design at the request of the buyer by first class post to be charged at cost if agreed.

(b) Shutters Design will be responsible only for deliveries made by our approved carrier. Prices are subject to VAT

(c) Non-delivery, damage, or pilferage in transit must be reported in writing to Shutters Design within a reasonable time of receipt of invoice or advice of despatch or delivery. Where goods are collected from Shutters Design, by the buyer or a third party nominated by the buyer the risk in the goods passes to the buyer upon delivery to the buyer or such a third party. Thereupon, all liability from Shutters Design in the goods for loss or destruction, breakages, shortages or non-delivery shall cease.

(d) When goods are delivered, the buyer shall be responsible for checking the complete order has been delivered. Any claim for shortage must be made within a reasonable time. Once delivered to the buyer, the buyer shall be responsible for their safekeeping and should make sure they are adequately insured against loss or damage.